Techniques and Mineral Chemistry of High Silica Bauxite for the Bayer Process
- A/Professor Haipeng Wang, WASM, Curtin University of Technology
|
Synthesis of monodispersed titania spheres with diameters in submicron range using dodecylamine
- Mr Daisuke Nogami, Kansai University, Japan
|
Behaviour of Aqueous Foam Stabilised by Nanosilica & Non-ionic Surfactant
- Kurt Nicholson, University of Newcastle
|
Flotation of coarse and ultrafine particles
- Graeme J Jameson, University of Newcastle
|
Dispersive Mixing in Chromatographic Column Influence Product Distribution of Protein Self-organization Reaction
- Yong Ding, Centre for Biomolecular Engineering, the University of Queensland
|
Mechanisms and Avoidance of Jams in Automated Tablet Dispensers
- Anthony HJ Paterson, School of Engineering and Advanved Technology, Massey University, New Zealand
|
Comparing the crystallization of sucrose and lactose in spray dryers as a test of the WLF equation
- Imtiaz-Ul Islam, University of Sydney
|
Carrot Fibre as a Carrier in Spray Drying of Fruit Juice
- Mrs Kloyjai Cheuyglintase, University of Canterbury, Christchurch, New Zealand
- Dr Ken R Morison, University of Canterbury, Christchurch, New Zealand
|
|
Development of a Winery Management System
|
Ethanol Steam Reforming : the Impact of Reaction Conditions on the Catalytic Reaction during Hydrogen Fuel Production
- Mrs Fei Wu, School of Applied Chemistry, Curtin University of Technology
|
Development in Catalytic Systems in Hydrogen Production via Ethanol Steam Reforming
- Mrs Fei Wu, School of Applied Chemistry, Curtin University of Technology
|
Thermo-Rheological Behaviour of Vegetable Oils Blended with Diesel Fuel
- Mr Thana Deawwanich, University of Adelaide
|
Energy infrastructures as complex adaptive systems
- Jim Petrie, University of Sydney
|
Redox Behaviour of Oxygen Carriers in Chemical Looping Combustion
- Dr Markus Luisser, The University of Newcastle
|
Integration of Geothermal Energy Extraction and Carbon Sequestration
- Dr Elham Doroodchi, The University of Newcastle
|
Pervaporation of water/organic mixture with the hydrophobic silica membrane functionalized by the phenyl group
- Mr Satoshi Imasaka, Kansai University, Japan
|
Development of Modified Palm Shell Activated Carbon for the Removal of Hexavalent Chromium
- Ms Mojdeh Owlad, Chemical Engineering department, University Malaya, Malaysia
|
Peer Assessment in Imparting Graduate Attributes
- A/Prof Vincent G Gomes, University of Sydney
|
Modeling and simulation of crude oil atmospheric tower using Peng-Robinson property package and relaxation algorithm
- Mahbod Mahdvar, Department of Chemical Engineering,Iran University of Science and Technology, Iran
- Mansor Shirvani, Department of Chemical Engineering,Iran University of Science and Technology, Iran
|
Fabrication of Nano-sized Poly(methylmethacrylate) Spheres Stabilized by Laponite and Their Electrorheological Characterization
- Hyoung Jin Choi, Inha University, Korea
|
Effect of Fillers on the Flexural and Tensile Properties of Recycled High Density Polyethylene
- Yung M Ngothai, School of Chemical Engineering
|
Experimental and theoretical study of depolymerization reaction of Polyethylene Terephthalate
- Yusuke Asakuma, University of Hyogo, Japan
|
A study on the mechanical properties of the combination of glass fibre and mineral fillers for reinforcing recycled low density polyethylene
- Dr Yung Ngothai, School of Chemical Engineering, The University of Adelaide, SA 5005
|
Process control modelling of an evacuated tube solar collector with inverse response characteristics
- Dr Michael R W Walmsley, University of Waikato, New Zealand
|
An assessment of the techno-economic feasibility of large-scale microalgal lipid production for biofuels
- Dr Peter J Ashman, School of Chemical Engineering, The University of Adelaide
|
Identification And Process Analysis Of An Industrial Condensate Stabilization Unit With Heat Integration
- Yudi Samyudia, Curtin University of Technology Sarawak Campus, Malaysia
|
Hydrolysis of Cellulose in Hot-Compressed Water under Continuous-Flow Reaction Conditions
- Mr Yun Yu, Curtin Unviersity of Technology
|
A new composite reaction engineering approach to model air drying of aqueous droplets containing multiple solutes
- Mr Kamlesh C Patel, Chemical Engineering Department, Monash University
|
Numerical Simulation Of Ignition With Less Oil In Abundant Oxygen in China
- Lei Yao, School of Power Engineering, Nanjing Normal University, China
- Mr Meng Xin Li, School of Power Engineering, Nanjing Normal University, China
|
Food Powder Forensics: Characterisation of Microstructures and Dissolution Properties
- Yuan Fang, Chemical Engineering Departiment, Monash University
|
Auto-thermal Reforming of Methane for Production of Hydrogen in a Novel Micro-Reactor
- Prof Behdad Moghtaderi, The University of Newcastle
|
Axial Bed Depth Profile and Total Hold-Up in a Horizontal Rotating Drum with Segmented Lifters
- Mr Iwan Harsono, Curtin University of Technology
|
Numerical Simulation of Gas-solid system in a Cyclone separator
- Ms Nina Darmawan, Curtin University of Technology
|