• 2D Computer Simulations of Ohmic Heating of Milk Solutions in Laminar Annular Flow
• A Combined membrane and catalytic process for the removal of volatile compounds from dilute aqueous solutions
• A DEM Study of the Mixing of Particles Induced by a Flat-blade
• A Distributed Parameter Model for Particles in the Spray Drying Process
• A Method of Noise Reduction for the Cooling Fans Used in Locomotives
• A Numerical Approach to Improve the Flow Model of an Electrostatic Precipitator
• A Preliminary Model for Liquid Solidification in Blast Furnace Hearth
• A Process for Melt Grafting Itaconic Anhydride onto Polyethylene
• Activated Carbon Supported Potassium Catalyst for Transesterification of Palm Oil
• Adaptive Supervisory Control of an Industrial Steel Slab Reheating Furnace
• Adding failure effects to HAZOP
• An evaluation of superheated steam drying of brewer’s spent grain
• An Experimental Investigation on Oil and Solid Separation in Palm Oil Mill Effluent (POME) Treatment
• An Operational Model For A Well-Stirred Membrane Bioreactor: Reactor Performance Analysis
• Analysis of Flow Patterns Inside the Stirred Tank Used in Alumina Refinery
• Application of Modeling to the Understanding of Blast Furnace Hearth Drainage
• Batch Plant Design
• Biodiesel Synthesis: Chemical Equilibrium Of Oleic Acid Esterification With Ethanol In The Presence Of Ethyl Acetate
• Bioethanol from lignocellulosic wastes in Australia
• Bringing Practical Experience into the Undergraduate Classroom via Web-Based Group
• Brownian diffusion of ultrafine particles with gas bubbles
• Capillary rheometry of microstructured fluids
• Catalytic study of Fe supported on mesoporous Al-MCM-41 catalyst in Fischer-Tropsch reaction using PSRA technique
• CFD Model of Coal Blends Combustion and Effects of Some Parameters
• Characterisation of Fouled and Cleaned Industrial Reverse Osmosis Membranes by Electrical Impedance Spectroscopy
• Chemical Engineering and the Melbourne Model
• Co2 Absorption with Aqueous Mixtures Of Ionic Liquid And AMP
• CO2 sequestration by mineral carbonation in the Australian context
• Combining a Novel Initiator and Supercritical CO₂ for a More Sustainable Production of Polymers
• Computational Fluid Dynamics Study of New Vacuum Degassing Process
• Controlled Living Emulsion Polymerization
• Controlling the Properties of Lactose Particles Extracted in Ternary and Quaternary Systems
• Conventional Steady State Recovery and Enrichment of Surfactant through Foam Fractionation
• Dehydro-Aromatisation of Methane under Non-Oxidative Conditions
• DEM simulation of particle percolation in a packed bed: effect of material properties
• Density of Palm Oil-Based Methyl and Ethyl Esters: measurements and estimations
• Design and Biochemical Characterization of Lac Binding Region Peptide as Ligand for Application in Affinity Purification of Plasmid DNA
• Design and Construction of a Laboratory Scale Cyclone Tribocharger
• Determination of Optimum Operating Conditions for Methanol Synthesis Base on Taguchi technique
• Development of a Soft Physicochemical Stomach (Sps) Model for Simulation of the Human Gastric Digestion and Examining of the Ph Profile
• Development of Quantitative Methods for Analysis of DNA Degradation Patterns in Biological Material
• Direct Numerical Simulation of Emulsion Flow Through Porous Media
• Discrete Particle Simulation of Coal-Medium Flow in Dense Medium Cyclones
• Economic Feasibility Study of Gasification Plant for the New Zealand Wood Processing Industry
• Effect of Cerium Promotion on Propane Dry Reforming
• Effect of Impeller Speed Modulation on Isolated Mixing Regions in Stirred Vessels
• Effect of lactose source during milk powder standardisation on their stickiness behaviour
• Effect of particle properties on the compaction of ibuprofen powders
• Effect of slime clay particles on coal flotation
• Enhanced cleaning of woolen fabrics through enzyme immobilisation
• Enhancing Capabilities and Competency of Specialist Contractors through Tripartite Partnership - Case Study on High Pressure Water Jetting
• Evolution of a Sustainable Development Program for the Mineral Processing Industry
• Experimental and Computational Investigation into Compound Wide Angle 3D Air Diffusers
• Explicit Numerical Simulation of Binary Drop Collision in a Linear Shear Field at Finite Reynolds Numbers
• Fabrication of Sodalite-Polymer Nanocomposite Membranes
• Flotation Behaviour of Sulphide Mineral Size Fractions with Controlled Contact Angle
• Flotation of coarse mineral particles
• Fluid modelling for Rankine Cycle waste heat recovery from a spark ignition generator
• Foam granulation: comparison of nucleation via drops and foams
• Forced periodic operation of propane steam reforming with CO₂ as carbon gasifying agent
• Fundamental Aspects of Carbonate and Bicarbonate Salt Flotation
• Get Chartered Information Session
• Greenhouse Gases Reduction from Solar Hot Water System: Case Study for Thailand
• GTL Fuel Synthesis: Product Distribution and Generalised Kinetic Modelling for Individual Hydrocarbon Species
• Hydrodynamics of Industrial Scale Bubble Columns: An Experimental Investigation
• Hydrodynamics of Slug Flow Capillary Micro-Reactor
• In Producing Clean Hydrogen Fuel: The Effect of substrate type on the Catalytic Performance of Nickel Catalyst during Ethanol Steam Reforming
• In situ investigation of the active catalyst for green direct benzene to phenol oxidation
• Influence of jet velocity on jet breakup in immiscible liquid-liquid systems
• Inherent Safety Analysis of Propane Pre-cooled Dual Independent Expander Process for LNG
• Inhibition of premixed hydrocarbon flames with CF3I
• Ink-releasing mechanism of waterless offset printing plate
• Inorganic-Organic Composite Microspheres for Prime-Boost Genetic Therapies via Nasal Cavity
• Interaction between a carbon nanotube and an air bubble
• Interfacial chemistry and particle interactions in clay mineral dispersions
• Investigating the correlation between ZnO thin film surface morphologies and photocatalytic activity in the photooxidation of methylene blue
• Investigating the Potential of using Mussel Shells for the Synthesis of Hydroxyapatite
• Investigation of the Rheological Characteristics of Shear Thickening Fluids for Potential Applications in Body Armour
• Key factors in stable formation of liquid marble and hollow granule
• Kinetic Analysis of Methacrolein and Lactone Formation over Lanthanide Phosphomolybdate Catalysts
• Kinetic Analysis of Oleic Acid Esterification Using Lipolytic Enzyme as Catalyst
• Kinetics of Emulsified Oil Removal in Wastewater Using Barley Straw
• Life Cycle Assessment of a Beverage Industry’s Water Recycling Plant
• Magnetic Photocatalyst for Natural Organic Matter Oxidation
• Measurement and Modelling of Thermal Transients in Coselle Based CNG Transport
• Measurement of Crystal Crowth Kinetics of An Alpha-Amylase from Bacillus Licheniformis
• Measurement of Electrostatic Dipoles and Net Charge on Particles Suspended In Air
• Measurement of the Transition from Bubbling to Turbulent Fluidisation using Magnetic Resonance
• Methods to Evaluate Growth Rate Kinetics Parameters from Experimental Batch Crystallization Data.
• Methods and techniques for natural gas hydrates characterisations: A review
• MIQP-BASED MPC in the Presence of Control Valve Stiction
• Modelling and Control Action Optimisation for Biological Wastewater Treatment Application
• Modelling of Blast Furnace: Importance of Cohesive Zone Treatment
• Modelling of Fast Pyrolysis in Biomass Gasification
• Modelling of Ladle Eye Phenomena
• Modelling of Metal Droplet Generation in Oxygen Steelmaking
• Modelling transport fuels to 2100
• Nonlinear Dynamic Operability Analysis of Methyl Tertiary Butyl Ether Reactive Distillation Column
• Not in My Backyard: Industry Siting and Public Perception of Risk
• Nuclear power and greenhouse gases - fuelling the debate
• Numerical Simulation of Fluidisation Behaviour of Fine Particles
• Numerical Study of the Particle Movements and “Fish-hook” Phenomenon in Hydrocyclones
• On the Motion of Aggregates Composed of Different Numbers of Particles Through a Non-Uniform Magnetic Field
• Operator Effectiveness by Design
• Optimal Bed Configuration in a Multifunctional Dehydrogenation Reactor
• Optimising Regrinding Chemistry for Pyrrhotite Flotation
• Option Evaluation of Solar Kilns for Drying Timber in Terms of Embodied Energy Use
• Oxygen Transfer into Falling Droplets for the Application of Wastewater Treatment
• Parameter Uncertainty Effects on Variance-Based Sensitivity Analysis for Linear-In-Parameter Models
• Particle Deposition Studies in Natural Gas Pipe Lines using CFD Modeling
• Particle Dynamics and Granular Temperatures in Dense Fluidized Beds as Revealed by Multiple Light Scattering Techniques
• Performance Evaluation of Ethanol Production through Continuous Fermentation
• Photo-oxidation of polyethylene nanocomposites
• Photocatalytic Degradation of Geosmin and MIB in an Immobilised TiO₂ Photoreactor
• Prediction of Coal Properties using Neural Networks:Novel Approach based on Small Training Dataset
• Preliminary investigation of magnetron sputtered thin films as photocatalysts for advanced oxidation
• Preparation of Activated Carbon from Durian Peels
• Printing Biomolecules Part-1: Achieving Total Control of Biomolecule Delivery Using Ink Jet Printing
• Production of Co2 Basket by Amine Modified Commercial Palm Shell Activated Carbon
• Production of Mallee Biomass in Western Australia: Life Cycle Greenhouse Gas Emissions
• Progress in Modeling Aromatic Combustion Kinetics
• Promise of Novel Magnetic Nanoparticles for Gene Therapy Application: Synthesis, Stabilization, and Gene Delivery
• Racemic Ibuprofen Solubility in Ethanol and Aqueous Ethanolic Mixtures
• Reactive extraction of antibiotics with TOMAC/Kerosene System: I. Equilibrium
• Reactive extraction of antibiotics with TOMAC/Kerosene System: II. Kinetics
• Reduction of Lead Pollution Using Soil as Liner Material
• Reflections on Multidisciplinary Engineering Design Project
• Removal of free fatty acids from crude palm oil with sulfated catalysts
• Risk Assessment Focus on Health, Safety, Environment and Community during Design
• Safety in Design - Two Key Studies - Fire Safety and HAZID
• Shear responsive flocculation and improved dewaterability of talc suspensions
• Simplified Risk Assessment - “Can This Demonstrate Adequacy”
• Simulation of flow regimes of particles in a horizontal pipe
• Soft-Sensor Development for Process Variables in Horizontal Rotating Drums Guided by Dem Models
• Solar boosting of low grade waste heat in low temperature pinch applications
• Sorption Kinetics of Riboflavin from Diluted Lactose Solution in Batch Systems
• Stability Study of Nanopigment Dispersions
• Stakeholder perceptions of chemical engineering graduate attributes at the University of Adelaide
• Stratified tanks for heat storage - Interface control and re-establishment
• Study on Synthesis and Characterization of Polystyrene-b-poly (Glycidyl Methacrylate) diblock copolymers
• Supporting experiential learning: An integrated website for Chemical Engineering laboratories
• Sustainability - What we Done!
• Synthesis and Dissolution Studies of Brannerite, a Uranium Containing Mineral
• Synthesis of carbon-natural zeolite composites with controlled amount of carbon and evaluation of their adsorption properties
• Synthesis of Gold-Magnetite Magnetic Nanoparticles for Biomedical Applications
• Synthesis of NaA zeolite membranes : Comparative study of Microwave, Autoclave and Electrophoretic Techniques
• Synthetic Transport Fuels
• Tar Removal in a Hot Gas Bubble and Spray System for Gas Cleaning in Biomass Gasification
• Techno-Economic Study of Thermal Energy Storage Systems in Tropical Climate University Building
• Temperature and Scale Effects on the Degradation of Vitamin C in Spray Dryers
• Temperature Responsive Polymers as Multiple Function Reagents in Mineral Processing
• The Effect of Dryer Size and Bulk Gas Humidity on Crystallinity in Spray Dryers: Simulation Predicted Behaviours
• The Efficacy of Ozone/BAC in Reducing Disinfection By-product Precursors from Drinking Water
• The Future for Australian Engineering Services
• The Inertial Effects on the Capillary Flow in Surface Grooves
• The Influence of Addition Method on the Flocculation of Model Suspensions by Poly(N-isopropyl acrylamide) and Derivatives
• The passage of food through animal stomaches: A chemical reactor engineering approach
• The Role of Geometry Confinement in Fluid Flow Driven Self-Assembly
• The Stability of n-dodecane/brine Nanoemulsions Produced by Phase Inversion Temperature Method
• Three- Dimensional Numerical Study of Methane-Air Counterflow Non-Premixed Flames
• Towards in Silico Rational De Novo Design of Peptides for Inorganic Interfaces
• Transient Modelling of a Solar Thermal Organic Rankine Cycle
• Transitions in beds of silica sand particles fluidized by air
• Understanding of Laminar Flow Field in a Packed-Bed with and without a Static Mixer by Using Computational Fluid Dynamics
• University Accreditation Guidelines Update
• Using batch process data to determine chemical reaction networks
• Using FBRM to optimise polyelectrolyte and lignite doses in conditioning of sewage sludge
• whynotchemeng Program Update

168 abstracts