• A new composite reaction engineering approach to model air drying of aqueous droplets containing multiple solutes
• A Review on the Synthesis of Block Copolymers Containing Polystyrene Segments via Anionic Polymerization
• A study on the mechanical properties of the combination of glass fibre and mineral fillers for reinforcing recycled low density polyethylene
• Adsorbents From Methane Fermentation Sludge
• Alkoxylation of Biodiesel and its Impact on Low-Temperature Properties
• An assessment of the techno-economic feasibility of large-scale microalgal lipid production for biofuels
• Auto-thermal Reforming of Methane for Production of Hydrogen in a Novel Micro-Reactor
• Axial Bed Depth Profile and Total Hold-Up in a Horizontal Rotating Drum with Segmented Lifters
• Behaviour of a Rushton turbine in a liquid-fluidized bed
• Behaviour of Aqueous Foam Stabilised by Nanosilica & Non-ionic Surfactant
• Carrot Fibre as a Carrier in Spray Drying of Fruit Juice
• Catalytic Pyrolysis of CHF₃ over K₂O/AC Catalyst
• Comparing the crystallization of sucrose and lactose in spray dryers as a test of the WLF equation
• Composite RF-bamboo nanoporous carbon for adsorption heat pump applications
• Current Development on the Application of Polystyrene Telechelic Polymers for Macromolecular Structure Design
• Development in Catalytic Systems in Hydrogen Production via Ethanol Steam Reforming
• Development of a Winery Management System
• Development of Modified Palm Shell Activated Carbon for the Removal of Hexavalent Chromium
• Dispersive Mixing in Chromatographic Column Influence Product Distribution of Protein Self-organization Reaction
• Displacement Of Viscoplastic Fluids In Eccentric Annuli: Numerical Simulation And Experimental Validation
• Effect of Fillers on the Flexural and Tensile Properties of Recycled High Density Polyethylene
• Effect of Process Variables on the Performance of an Industrial Ethylene Oxide Reactor
• Effect of the Gibbs elasticity on foam stability
• Effects of Alkyl-Chain-Length of Primary Amine as Template and Catalysis on Characteristics of Mesoporous Silica Microsphere
• Energy infrastructures as complex adaptive systems
• Environmentally Sustainable Odour Control for the Merrimac WWTP Upgrade
• Ethanol Steam Reforming : the Impact of Reaction Conditions on the Catalytic Reaction during Hydrogen Fuel Production
• Experimental and theoretical study of depolymerization reaction of Polyethylene Terephthalate
• Fabrication of Nano-sized Poly(methylmethacrylate) Spheres Stabilized by Laponite and Their Electrorheological Characterization
• Flotation of coarse and ultrafine particles
• Food Powder Forensics: Characterisation of Microstructures and Dissolution Properties
• From CO₂ to algae to fuel - An integrated process engineering approach
• Hydrolysis of Cellulose in Hot-Compressed Water under Continuous-Flow Reaction Conditions
• Identification And Process Analysis Of An Industrial Condensate Stabilization Unit With Heat Integration
• Influence of pore volume properties of carbon electrode materials on the performance of electric double layer capacitor
• Integration of Geothermal Energy Extraction and Carbon Sequestration
• Investigating the Effectiveness of Phase Change Material as a New Type of Protective Clothing for Firefighters
• Investigation of a Non-adiabatic two-step chain branching reaction
• Mechanisms and Avoidance of Jams in Automated Tablet Dispensers
• Mini-Review - Polystyrene Telechelic Polymers Synthesized Via Anionic Polymerization. 1. Research Progress In Preparation Process Thereof
• Modeling and simulation of crude oil atmospheric tower using Peng-Robinson property package and relaxation algorithm
• Modeling and Simulation of Flux Decline in Crossflow Ultrafiltration
• Numerical Modelling of the Deagglomoeration of Fine Powders
• Numerical Simulation of Gas-solid system in a Cyclone separator
• Numerical Simulation Of Ignition With Less Oil In Abundant Oxygen in China
• Optimum Load Distribution in Opposed to Uniform Load Distribution over Multiple Units for a Power Plant
• Peer Assessment in Imparting Graduate Attributes
• Pervaporation of water/organic mixture with the hydrophobic silica membrane functionalized by the phenyl group
• Polyphenolic Extraction from momordica charantia l.; Multivariables Study Using Experimental Design
• Preparation of Silver Doped Titanium Coating for Bactericidal Application
• Process control modelling of an evacuated tube solar collector with inverse response characteristics
• Redox Behaviour of Oxygen Carriers in Chemical Looping Combustion
• Regular Solution Model Used for the Prediction of Supercritical Carbon Dioxide Extraction of Phenol from Wastewater
• Soft Sensor Development for Estimating Impact Intensity in Horizontal Rotating Drums
• Study on the Synthesis and Application of Glycol Diglycidyl Ether Terminated Polystyrene Oligomers
• Synthesis and Characterization of Epoxy End-capped Polystyrene Oligomers
• Synthesis of monodispersed titania spheres with diameters in submicron range using dodecylamine
• Techniques and Mineral Chemistry of High Silica Bauxite for the Bayer Process
• Thermo-Rheological Behaviour of Vegetable Oils Blended with Diesel Fuel
• Understanding Formation of Rod-Shaped Iron Oxide Nanoparticles
• Validation of a Discrete Element Code using Magnetic Resonance Measurements

61 abstracts